Single Screw Plastic Exhaust Air Extruder |
|
Details | |
|
|
Brief Introduction:: It is mainly used to extrude soft, rigid PVC, PE etc. thermoplast. It can produce many plastic product for example film, pipe, stick, sheet, thread, insulating pipe and other hollow plastic product. And it can be used in granulating. This machine is good designed, |
large output, good plasticizing, low power consumption. It is driven by involutes gear. It is little noise, good stability, long time running. |
Machine Model |
Ratio (L/D) |
Output |
Screw Speed |
Driving Power |
Center Height |
SJ-30/25 Extruder |
25/1 |
1.5-10kg/h |
15-150r/min |
5.5kw |
1000mm |
SJ-45/25 Extruder |
25/1 |
2.5-22.5kg/h |
12.5-130r/min |
7.5kw |
850mm/1000mm |
SJ-65/25 Extruder |
25/1 |
20-85kg/h 20-65kg/h |
33-100r/min 20-90r/min |
22kw |
1000mm/500mm |
SJ-90/25 Extruder |
25/1 |
30-100kg/h |
33.3-100r/min |
55kw |
1000mm |
SJ-120/25 Extruder |
25/1 |
20-150kg/h |
20-60r/min |
75kw |
1000mm |
SJ-150/25 Extruder |
25/1 |
50-300kg/h |
7-42r/min |
90kw |
1000mm | | |
|
|